AC Installation in Fort Mohave, AZ: What Happens on Install Day

Horizon Air LLC
Inside this guide

How an AC installation goes in a Fort Mohave home: the steps on install day, how to prepare, and what to ask a contractor. Call (928) 768-3761.

A good AC installation in Fort Mohave follows a clear order. The crew checks your home and the old equipment, removes the old system, sets and connects the new one, tests it, and shows you how to run it. Before any of that, the size of the system, the scope of the work and the paperwork should be settled in writing. This guide walks through each step, how to get your home ready, and the questions to ask any contractor, us included.

If you are still deciding whether to replace or repair, start with our guide to AC replacement in Mohave County, which covers cost drivers and timing. This article picks up after that choice is made.

Before the Crew Arrives: Settle These Four Things

Many installation problems can be avoided before the first tool comes out. Four decisions shape the whole job.

  • Size. The new system should be sized to your home, not copied from the old unit. Ask how the contractor worked out the size and what they measured.
  • Equipment. Know the make and model you are buying, and whether the indoor and outdoor parts are meant to work together.
  • Ductwork. Leaky or damaged ducts waste cooling no matter how good the new unit is. A look at the ducts belongs in the plan, and our guide to duct sealing in Arizona explains what that work involves.
  • Scope. Get in writing what is included: removal of the old equipment, any electrical or pad work, the thermostat, and any permit.

If your system is showing its age but you are not sure it is time, these warning signs your AC needs replacing can help you decide.

Installation Day, Step by Step

Every home is different, so the order can shift. This is the usual arc of a replacement. We install and replace air conditioners for homes in Fort Mohave and the towns around it, and our AC installation and replacement page covers the service.

Outdoor residential air conditioning unit beside a home
  1. Walk-through and protection. The crew confirms the plan with you, looks at where the old equipment sits and protects floors and walls where they will carry parts in and out.
  2. Power off and removal. The electrical supply to the old system is switched off. The old indoor and outdoor equipment is disconnected, and the refrigerant is removed by a trained technician as the rules require.
  3. Outdoor unit. The new outdoor unit is set on a level, stable base so it sits true and runs as designed.
  4. Indoor unit and connections. The indoor part is placed, the refrigerant lines and the condensate drain are connected, and the electrical connections are made.
  5. Leak check, charge and start-up. The lines are checked for leaks before the system is charged with refrigerant. The system then runs through a full cooling cycle so the crew can check airflow, temperatures and the thermostat.
  6. Walk-through with you. You should leave knowing how to use the thermostat, where the filter is, and who to call with questions.

Ask your installer to tell you which of these steps apply to your home, and how long the job is expected to take. A job that includes ductwork or electrical changes will take longer than a simple swap, and a contractor who has seen your home can say so up front.

Getting Your Home Ready

A little preparation makes the day smoother for you and for the crew.

  • Clear a path to the outdoor unit and the indoor unit, and move vehicles, planters and patio furniture out of the way.
  • Move belongings away from the indoor unit, whether it sits in a closet, a utility room or the attic.
  • Secure pets, and tell the crew about any gates or locks.
  • Plan for the house to be without cooling for part of the day. In summer, that means picking a cooler day and having water and shade ready for anyone at home.

Questions to Ask Any Contractor Before You Sign

You do not need to be an HVAC expert to compare bids. These questions work with any company.

  1. Is the contractor licensed, bonded and insured in Arizona? We are licensed, bonded and insured, our license is ROC# 344248, and any contractor’s license status can be looked up with the Arizona Registrar of Contractors.
  2. How was the system sized? Look for an answer about your home’s layout, windows and insulation, not just the size of the old unit.
  3. What exactly does the proposal list? Equipment, removal, labor, permit fees if any, and the thermostat should all be named, and you should have that list on paper.
  4. Who handles any permit? Ask whether your job needs one and who applies for it.
  5. What coverage comes with the equipment and with the labor, and what does it ask of you? Get the terms on paper before work starts.
  6. What happens if something is not right after the install? Ask who you call and how that call is handled.

Our promise is honest, upfront pricing, quality work you can trust, and respect for your home, and you approve a flat quote before work begins. Hold us to it the way you would any contractor, by what the proposal says. We are a local, family-owned company based in Fort Mohave.

After the Install: Your First Weeks

Once the new system is running, a few habits protect it.

  • Check the filter on the schedule your installer gives you. Desert dust loads filters quickly.
  • Keep the area around the outdoor unit clear of dirt, leaves and stored items.
  • Note the model and serial numbers and keep the paperwork in one place.
  • Book seasonal care. Regular AC maintenance and tune-ups help keep a system in good working order.

If something seems off in the first days, such as weak airflow, odd sounds or a system that will not reach the set temperature, contact your installer. For problems with older equipment, see our AC repair in Fort Mohave page.

Frequently Asked Questions

Quick answers to the questions people ask before they call or book.

1

Can I stay home during an AC installation?

Most people do, but expect noise, people moving through the house and the power off for part of the day. Keep pets and children away from the work areas.

2

Does an AC installation need a permit in Fort Mohave?

That depends on the scope of the job and local rules. On our installs, we handle everything from removal and permitting to the walk-through afterwards; whoever you hire, ask who will apply for any permit and get the answer in writing.

3

Should I replace the indoor and outdoor units together?

Manufacturers rate specific indoor and outdoor parts to work together, and mixing parts that are not rated as a pair can hurt performance. Ask your contractor which combination they are proposing and why.

4

Which areas does Horizon Air serve?

We serve Fort Mohave, Bullhead City, Mohave Valley, Golden Valley and the surrounding Mohave County communities, and we service all makes and models.

Talk to Horizon Air About Your Fort Mohave AC Installation

If you are planning an air conditioning installation or replacement, call Horizon Air LLC at (928) 768-3761 or send us a note through the contact page. Tell us about your home and your current system, and we will talk through your options.

Horizon Air LLC is a local, family-owned company in Fort Mohave, founded in 1976.

Horizon Air LLC

Protected by CleanTalk Anti-Spam